Standard Max Width |
20′ (6096 mm) |
Standard Max Height |
14′ (4267 mm) |
Mounting |
Face-of-wall or between jambs mounting |
Curtain |
Interlocking extruded .05″ aluminum slats. Nickel plated, steel screws and end locks to retain curtain within guides and prevent lateral movement. Plastic roller retainers for curtains over 16′ wide. |
Finishes |
Silver powder coat to mimic look of clear anodized aluminum; Bronze powder coat to mimic look of bronze anodized, White or Almond |
Counterbalance Assembly |
9″ (229 mm) steel “stepped” rings to minimize headroom and enhance door operation |
Universal guides |
18-gauge, roll-formed galvanized steel, pre-punched through-hole design for mounting to concrete, masonry, steel or wood jambs |
Quick-connect headplate |
11-gauge steel |
Bottom bar |
Extruded aluminum reinforced with steel, roll-formed angles |
Quick-connect bottom bar stops |
14-gauge galvanized steel |
Bottom seal |
Bulb-type, astragal seal |
Guide rub strips |
Polypropylene strips on both edges |
Standard springs |
3 3/8″ (86 mm) torsion springs |
Operation |
Manual push up center handle with side step plate, and center rope attached to bottom bar |
Lock |
Exterior curtain slide lock (accepts cylinder lock or 2 padlocks*) (right or left-handed) |
Exterior/interior finish |
Paint finish in choice of 12 standard colors: white, glossy white, garnet red, royal blue, polar blue, forest green, desert tan, dark teal, teal, walnut brown, bronze and silhouette gray. |