Design Your Door
Home > Commercial > All Commercial Doors > WindStorm™ Commercial Sectional Door – 525
windload-thermacore-525-wide

WindStorm™ Commercial Sectional Door – 525

The WindStorm™ 525 is a polyurethane-insulated commercial sectional door built to meet local wind codes, with an R-value of 16.22 (U-factor 0.12).

It’s the higher-insulation partner to the WindStorm™ 515, for exposed buildings that also need to hold their temperature.

Key features include steel construction, 1 7/8″ sections and a U-factor of .12. It fits openings up to 22’2″ wide and 20’1″ high. We supply, install and service sectional doors for businesses across New York City and Long Island, and can help with sizing, operators and code requirements.

Ask Us about This Door

Construction

Product Specifications
Standard Max Width 22’2″
Standard Max Height 20’1″
U-factor* .12
R-value** 16.22
Thermal break Yes
Panel Thickness 1 7/8“
Air infiltration 0.07 cfm/ft2 at 15mph
Exterior Steel 0.015″ (0.35mm)
Exterior Surface Embossed wood grain finish or microgroove textured
Standard Springs 10,000 cycles
Sound Transmission Class 20
Wind Load Minimum standard

*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door uses a calculated door section R-value for our insulated doors.

Warranty

  • 10 years against cracking, splitting or deterioration due to rust-through. 10 years delamination.
Colors

Exterior Colors

  • white color swatch

    White

  • Almond

    Almond

  • Brown

    Brown

  • sandstone color swatch

    Taupe

Optional Wood Grain Finishes

Wood grain option available
  • Thermacore Golden Oak

    Golden Oak

  • Thermacore Mission Oak

    Mission Oak

Actual door color may vary slightly from the digital representation above. Color samples of the Wind Load Sectional Door are available by request through your local Overhead Door™ Distributor.

Enhancements
  • Jamb Seal
  • 3″ Track
  • High Cycle Springs – 25k, 50k, 100k
  • Factory Glazed Windows

Compare similar doors

Rolling Sheet Door 780CD

Model 780CD

The ProStar® 780CD is a rolling sheet door for heavy-use openings up to 16′ x 16′ that don’t need a high wind rating.
View Details

Integral Frame Counter Doors 655

Model 655

The Model 655 is a factory-assembled counter door with an integral stainless steel frame, hood and fascia, so installation is fast and the finish is clean.
View Details

Fire-Rated Rolling Counter Door – 641

Model 641

The Model 641 is an NFPA 80 compliant fire-rated counter door with a 22-gauge stainless steel curtain and stainless exposed parts, a clean choice for kitchens and cafeterias.
View Details